Abstract
The effect of methyl oleate and ethanol addition on the combustion characteristics and soot emission of single droplets of diesel was studied by means of experimentation and kinetic modelling. The experiments were performed using a high-temperature tube furnace operating at 973K and the soot intensity indicated by the soot KL factor, and flame temperature were simultaneously measured using a two-colour pyrometry technique and a colour CCD camera. A detailed chemical kinetic calculation was performed using CHEMKIN-Pro. The experimental results showed that adding methyl oleate to diesel significantly suppressed the soot formation. The burning rate and flame temperature of the droplets decreased with increasing methyl oleate addition up to 20vol% and slowly increased again at methyl oleate addition exceeding 20vol%. Ethanol addition up to 10vol% in the diesel also led to less soot formation, lower flame temperature and burning rate. Kinetic modelling showed satisfactory agreement with the experimental results: the effectiveness of ethanol and methyl oleate in soot abatement was linear with the oxygen content in the fuel mixtures with ethanol being more effective than methyl oleate. The kinetic analysis also showed that ethanol utilised its oxygen atoms more efficiently than methyl oleate in suppressing the formation of soot precursors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.