Abstract

The effect of thermal-oxidative ageing on in-isolation and in-soil stiffness is investigated for two high-density polyethylene (HDPE) and two polyester (PET) geogrids when incubated in an oven at 90°C. It is shown that the in-isolation and in-soil stiffness of three out of the four geogrids decreased during the 4-month ageing time with a faster degradation of the two PET geogrids. In contrast, one of the HDPE geogrids examined with thicker rib showed slower degradation compared to the PET counterparts. It is also shown that a geogrid might have a higher unaged stiffness, but less aged stiffness compared to another geogrid made of the same polymer type. It is suggested that the ageing approach used in this study could be adopted for the selection of geogrids based on their long-term stiffness for structures such as reinforced embankments or mechanically stabilized earth walls that require a long service life. Moreover, results indicate that the stiffness improvement factor for PET geogrids decreases with ageing time. On the contrary, the stiffness improvement factor of the HDPE geogrid increases with time and hypothetically might keep increasing followed by a sudden drop to zero at full degradation of the geogrid.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.