Effect of oxidation products on service properties of motor oils

Abstract

One of the most urgent problems in chemmotology is how to create in an engine - lube oil system a controllable tribochemical process for the purpose of stabilizing the service properties of the oil and forming protective surface structures on the engine parts in order to minimize wear. The complexity of this problem reflects the diversity of the processes taking place in the tribological system. It is impossible to elucidate the mechanism of tribochemical reactions without studying the influence of changes in the oil composition and structure on its service properties during the course of operation. If the relationships involved in this influence are defined, it will become possible to change the structure of the oil in the desired direction and to achieve the desired service properties. For our studies we selected the motor oil M-10-G{sub 2}, conforming to GOST 8581-78. Samples of this oil were drawn during test-stand evaluations of D-144 and D-144-60 tractor diesels without any oil changes these tests were conducted jointly by the Institute of Problems in Mechanical Engineering of the Russian Academy of Sciences, the Scientific-Research and Design-Technology Institute of Tractor and Combine Engines (NIKTID), and the Vladimir Tractor Plant Production Association. Tests were runmore » for 1000 h with the standard conditions and test sequence, and for 1500 and 2300 h under conditions of a {open_quotes}constantly acting tribochemical regime{close_quotes}. Oil samples were drawn at 50-100 h intervals and tested by standard methods to determine the following physico-chemical characteristics: kinematic viscosity, acid and base numbers, ash, carbon residue, content of insoluble sludge, and content of particulate contaminant.« less