Effect of overlapping and space between stages of a three-bladed double-stage Savonius hydrokinetic turbine for low flow speed perennial river application

Abstract

ABSTRACT Savonius-like hydrokinetic turbine (SAHT) in low-speed flow streams of perennial rivers is not much explored. In this paper, a triple-bladed double-stage SAHT is designed, and its performance is investigated for low flow speeds within 0.45–0.65 m/s under the effect of blade overlapping (within 10–20% in each stage), turbine diameter (within 208–234 mm), and without and with space between the stages (5.0 mm) at different operating speed ratios. Different combinations of design and operating input parameters are studied to obtain a reliable assessment of SAHT performance. After analyzing the results, the best conditions of input parameters and output performance parameters are reported in their nondimensional forms for future use of the obtained results. The torque produced by the turbine increased with the applied brake load, leading to its maximum value at the highest brake load 0.83 times the maximum load. The highest coefficient of performance is obtained as 0.086 at a space 0.25 times the maximum space (i.e. 20 mm), overlapping 15%, brake load 0.83 times the maximum load, tip speed ratio 0.276. And for this, the corresponding power 0.85 times the maximum power (i.e. 0.201 W) at free-stream flow speed of 0.85 times the maximum flow speed (i.e. 0.65 m/s) is obtained. The present turbine with space and overlapping exhibits better performance than some available SAHT designs of single/double stage, two-blade/multi-blade with/without overlap configurations. The novelty of the work is that an improved SAHT has been developed for low-flow speed perennial river applications in the band of low tip speed ratios by combining design conditions like double-stage, space between stages, and overlapping.