Abstract
AbstractSpotted rose snapper (Lutjanus guttatus) fillets packed in two polymer films, polyamide 6,6 (PA66) and polyethylene terephthalate (PET), were stored at −20°C for a period of 120 days. Films were tested for melting temperature (PA66 253–257°C and PET 252–255°C), oxygen transmission rate [PA66 51.8 ± 12.9cm3/(m2·24h·atm) and PET 152.7 ± 0.2cm3/(m2·24h·atm)] and water vapor transmission rate [PA66 17.8 ± 1.7g/(m2·24h) and PET 6.5 ± 0.2g/(m2·24h)]. Sensory analyses (firmness, flavour and appearance) were performed at 0, 30, 60, 90 and 120 days of storage after baking the fillets in the same storage bags. For raw fillets, their water‐holding capacity (WHC), total aerobic counts (TAC), pH, trimethylamine (TMA) and shear‐force resistance were measured at the same periods. Sensory analyses after baking showed no differences between the fillets packaged in the two films. The WHC, TAC, pH and TMA values in both products were kept within accepted limits. The fillets packed in PET showed a significant increase in firmness (shear‐force resistance) during the first 60 days of storage and then a decrease at 90 days due to dehydration through the film seals. Over the same period, the fillets packed in PA66 showed no significant changes in firmness. In this study, it was demonstrated that it is possible to develop a ready‐to‐bake fish fillet product by using ovenproof films for packaging during storage. Copyright © 2006 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.