Abstract
This study investigates the effects of osmotic dehydration on garlic clove halves using a low-pH osmotic solution with ascorbic acid, concentrated tomato juice, and basil extract (45° Brix). Samples, both dehydrated and fresh, were subjected to various drying methods. Physical properties, such as CT scan analysis, texture profile analysis (TPA), porosity, and density, were examined. Additional parameters like energy consumption, specific energy consumption, moisture content, water activity, and color change were evaluated. Osmotic dehydration reduced moisture content by over 7.5%. The specific energy consumption for microwave vacuum drying (MVD) was 95 kJ/g for osmotically dehydrated samples compared to 118 kJ/g for non-dehydrated samples. Drying times decreased by 24 min for MVD and 15% for microwave convective drying (MCD). The Weibull model best fit the drying kinetics, with R2 values above 0.99 and RMSE below 0.03 for all methods. TPA tests showed no significant impact of osmotic dehydration on hardness, though drying methods significantly affected hardness, ranging from 49 N to 707 N. Color change was higher for osmotically dehydrated samples, reaching 37.09 for OD-CD compared to 29.78 for CD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.