Abstract

Microstructural analysis (crystallinity, orientation) have been performed on stretched and isothermally crystallized poly(ethylene naphthalene 2,6 dicarboxylate)(PEN) films. The crystallinity ratios are higher at drawing temperatures below Tg than above Tg, and for similar draw ratios, a higher orientation can be obtained at drawing temperature below Tg than above Tg. The molecular mobility study by dielectric relaxation spectroscopy (DRS) and mechanical relaxation spectroscopy (MRS) was carried out as a function of draw ratio (λ) and drawing temperature (Tdraw). Drawing in glassy state apparently splits the α-relaxation into two components: an α-low component which exhibits a strongly accelerated dynamics but this relaxation process is masked by microstructural rearrangements occurring while heating followed by an α-high relaxation process. The two sub-glass processes (β and β∗) are influenced by the drawing in the glassy state. This can be observed from the increase of relaxation amplitudes and was related to a high disorder in the amorphous phase that is induced by drawing below glass transition temperature. Drawing at 160°C induces the opposite trend associated with crystallization and confinements effects. Differences in viscoelasticity behaviour were found by MRS in tensile mode parallel and perpendicular to stretching direction. As a result, when comparing oriented and crystallized samples with the same crystallinity ratios, a strong effect of morphology on the location and amplitude of the three relaxations of PEN can be found.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.