Effect of organosilane coupling agents on microstructure and properties of nanosilica/epoxy composites

Abstract

AbstractThree types of silane coupling agents, γ‐aminopropyltriethoxysilane, γ‐glycidoxypropyltrimethoxysilane, and γ‐methacryloxypropyltrimethoxysilane, were used as modifiers to modify the surface of the nanosilica, respectively, and the nanocomposites of the epoxy resin filled with nano‐sized silica modified by three silane coupling agents were prepared by physical blending. The properties of the modified silica nanoparticles were characterized by Fourier transform infrared spectrum and particle‐size analyzer. The microstructure, mechanical behavior, and heat resistant properties of the nanocomposites were investigated by transmission electron microscopy, scanning electron microscopy, thermo gravimetric analyses, differential thermal gravity, differential scanning calorimetry, and flexural tests. The results showed that these modifiers are combined to the surfaces of nanosilica by the covalent bonds, and they change the surface properties of nanosilica. The different structures of coupling agents have different effects on the dispersibility and stability of modified particles in the epoxy matrix. In comparison, the silica nanoparticles modified by γ‐glycidoxypropyltrimethoxysilane exhibit a good dispersivity. The nanocomposites with 4 wt% weight fraction nanosilica modified by γ‐glycidoxypropyltrimethoxysilane have higher thermal decomposing temperature and glass transition temperature than those of the other two composites with the same nanosilica contents, and they are raised by 43.8 and 8°C relative to the unmodified composites, respectively. The modified silica nanoparticles have good reinforcing and toughening effect on the epoxy matrix. The ultimate flexural strengths of the composites with 4 wt% nanoparticles modified by γ‐aminopropyltriethoxysilane, γ‐glycidoxypropyltrimethoxysilane, and γ‐methacryloxypropyltrimethoxysilane are increased by 10, 30, and 8% relative to the unmodified composites, respectively. The flexural fracture surfaces of modified composites present ductile fracture features. POLYM. COMPOS. 2012. © 2012 Society of Plastics Engineers