Abstract
This work presents experimental data on gas holdup in slurry bubble columns with a foaming liquid. The effects of solids concentration, solid particle size, superficial phase velocities and column dimensions on the gas holdup are analyzed. At low superficial gas velocities (less than 4cm/s), for which the liquid does not foam, the presence of solids with small particle size does not affect the gas holdup whereas solids with large particle size induce foam formation and thus their presence increases the gas holdup. In the foaming regime, an increase of solids concentration decreases the gas holdup. The operating mode has a strong effect on the gas holdup: the semi-batch operating mode (stagnant liquid-solid suspension) increases the ability of the liquid to foam with respect to the continuous mode. Regarding the effect of column dimensions, the results presented show that the height of the bubble column does not affect at an appreciable extent the gas holdup in the range 6 < LID < 12. At high gas velocities (greater than 6 cm/s) the gas holdups obtained in a 30 cm-internal diameter column are the same as those measured in a 10 cm-internal diameter column.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
