Abstract
The partitioning of copper, zinc, cadmium and lead between bottom ash and combustion flue gas was investigated in a municipal solid waste (MSW) incinerator. Material balances were established and transfer coefficients were determined for seven 2-h periods. Statistical analysis of the data allowed assessment of the uncertainty and investigation of the effect of waste input variations as well as process conditions. As a result, 6% of Cu, 54% of both Zn and Pb and 90% of Cd in the waste feed were transferred into the combustion flue gas, the rest was found in the bottom ash. The uncertainty of the partitioning in terms of relative width of 95% confidence intervals was estimated as 33% for Cu, 7% for Zn, 7% for Cd and 21% for Pb. Multiple linear regression indicates that, for the incinerator investigated, changes in combustion parameters have a negligible effect on the transfer coefficients of the selected metals; and the partitioning of Cd and Pb does not correlate significantly with changes in the waste composition. A significant positive regression between the transfer of Cu and the chlorine content of the waste feed was observed. The results of this study are instrumental to determine the waste composition by analysing a single combustion product only.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Waste Management & Research: The Journal for a Sustainable Circular Economy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.