Abstract
The opening size is important to the ventilation of building because various opening sizes affects the ventilation performance for building. Therefore, the objective of this study is to investigate the effect of opening size on indoor airflow characteristics of naturally ventilated building model. The numerical simulation with steady RANS equations was used. A total of six different opening ratios, namely 4:1, 2:1, 1:1, 1:2, 4:9 and 1:4 were considered in this study. The results of mesh independence study and model validation were also in good agreement with previous study. The simulation results show that velocity and pressure of the indoor air, ventilation rate, and pressure coefficient are highly dependent on the opening ratio. The velocity and pressure contour indicate that the lower the opening ratio, the higher the velocity and subsequently lower pressure inside the building. In addition, the pressure coefficient and ventilation rate are also increased as the opening ratio decreases. Besides, the results indicate that percentage increase in ventilation rate of opening ratio 4:1 and 2:1, 2:1 and 1:1, and 1:1 and 1:2 is higher than those of opening ratio for 1:2 and 4:9, 4:9 and 1:4. The study concluded that pairing a large outlet and small inlet leads toincrease in better ventilation rate for building.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The International Journal of Integrated Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
