Effect of one-way clutch on the nonlinear vibration of belt-drive systems with a continuous belt model

Abstract

This study focuses on the nonlinear steady-state response of a belt-drive system with a one-way clutch. A dynamic model is established to describe the rotations of the driving pulley, the driven pulley, and the accessory shaft. Moreover, the model considers the transverse vibration of the translating belt spans for the first time in belt-drive systems coupled with a one-way clutch. The excitation of the belt-drive system is derived from periodic fluctuation of the driving pulley. In automotive systems, this kind of fluctuation is induced by the engine firing harmonic pulsations. The derived coupled discrete–continuous nonlinear equations consist of integro-partial-differential equations and piece-wise ordinary differential equations. Using the Galerkin truncation, a set of nonlinear ordinary differential equations is obtained from the integro-partial-differential equations. Applying the Runge–Kutta time discretization, the time histories of the dynamic response are numerically solved for the driven pulley and the accessory shaft and the translating belt spans. The resonance areas of the coupled belt-drive system are determined using the frequency sweep. The effects of the one-way clutch on the belt-drive system are studied by comparing the frequency–response curves of the translating belt with and without one-way clutch device. Furthermore, the results of 2-term and 4-term Galerkin truncation are compared to determine the numerical convergence. Moreover, parametric studies are conducted to understand the effects of the system parameters on the nonlinear steady-state response. It is concluded that one-way clutch not only decreases the resonance amplitude of the driven pulley and shaft's rotational vibration, but also reduces the resonance region of the belt's transverse vibration.