Effect of Numbers of Turns of High‐Pressure Torsion on the Development of Exceptional Ductility in Pure Magnesium

Abstract

The low ductility of magnesium at room temperature is usually attributed to an insufficient number of independent slip systems. Recent research has shown that refining the grain structure of pure magnesium promotes a breakdown in the Hall‐Petch relationship at low strain rates and may lead to the development of exceptional ductilities. This report describes the evolution of microstructure and the mechanical behaviour of pure magnesium using different amounts of imposed plastic deformation by high‐pressure torsion (HPT). It is shown that the initial coarse grains undergo twinning followed by a gradual grain refinement. The flow stress at low strain rates decreases as the grain size is reduced, thereby confirming an inverse Hall‐Petch behaviour. The elongation to failure increases with grain refinement and elongations over 300% are achieved after 1/2 turn of HPT. These experimental data agree with a model for the low temperature deformation behaviour of fine‐grained pure magnesium.