Abstract
The present paper provides a solution to enhance the reliability of bonding. The effect of the nonwoven carbon tissue (NWCT) composite adhesive layer on the bonding strength and reliability of aluminum alloy of single lap joints (SLJ) was investigated by embedding NWCT into the epoxy adhesive layer. The bonding strength, Weibull distribution, metallography of cross section, and fracture surface morphology of NWCT specimens were investigated. The results showed that the average bonding strength and Weibull characteristic strength (WCS) of NWCT-reinforced specimen were 16.78 and 17.17 MPa, which increased by 70.2 and 66.7%, respectively, compared with the neat specimen, and the Weibull modulus increased from 11.46 to 22.83, which indicated that NWCT specimens had higher bonding reliability. The mechanism of microcrack formation was obtained by analyzing the cross section of specimen loaded 95% WCS without macroscopic damage. The metallographic section showed that the microcrack of the neat specimen originated from the adhesive–aluminum interface, while the microcracks of the NWCT specimen originated from the interface between short carbon fibers (SCF) and adhesive. Typical failure modes were gained from visual observation and SEM. The failure mode of the neat specimen included more Al–adhesive interface failure, while the NWCT specimen included more internal failure of adhesive–SCFs with the fracture, pullout, peeling, and slippage of SCFs improving the toughness and bonding strength of the adhesive layer. The bridging effect of SCFs in the adhesive layer reinforced by NWCT can even the load and release the stress to improve the bonding reliability.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
