Effect of nonlinear stress-dependency and cross-anisotropy on the backcalculation outputs from the TSD deflection slopes and the effect on estimated pavement performance

Abstract

ABSTRACT The Traffic Speed Deflectometer (TSD) is a mobile vehicle that measures deflection slopes. Deflection slopes have been utilised in previous studies to backcalculate pavement layers’ moduli. However, the nonlinear stress-dependency and cross-anisotropy of unbound granular materials and fine-grained soils were overlooked in those studies. Utilising the Finite Element Method (FEM) based on static analysis in this study to evaluate a three-layered flexible pavement system with specific material properties and layer thicknesses revealed that neglecting the nonlinear stress-dependency of base and subgrade layers underestimated the permanent deformation life of the backcalculated pavement by more than 45%. Neglecting the cross-anisotropy of the base layer with the design anisotropy ratio of 0.5 increased the backcalculated Asphalt Concrete (AC) modulus by more than 21%, increased the estimated permanent deformation life of the pavement by more than 160%, and decreased the backcalculated base modulus by around 28%. Neglecting the cross-anisotropy of the subgrade with the design anisotropy ratio of 0.5 almost increased the estimated permanent deformation life of the pavement by 15%. The results underscore the necessity to consider the nonlinear stress-dependency and cross-anisotropy of unbound granular materials and fine-grained soils in backcalculating pavement layers’ moduli from TSD deflection slopes.