Abstract
Abstract Effects of non-axisymmetric endwall profiling on total pressure loss, heat transfer, and film cooling effectiveness of a transonic rotor blade were numerically investigated. The numerical methods, including the turbulence model and grid sensitivity, were validated with the existing experimental data. To reduce the thermal load on endwall, non-axisymmetric endwall profiling near leading edge and at pressure-side corner area was performed with a range of contour amplitudes. Heat transfer and flow fields near the profiled endwalls were analyzed and also compared with the plain endwall configuration. On the profiled endwall, three kinds of cooling holes, i.e., cylindrical holes, rounded-rectangular holes, and elliptical holes, were arranged, and film cooling effect was investigated at three blowing ratios. Results indicate that, with endwall profiling, the area-averaged Stanton number on endwall is reduced by 7.71% and total pressure loss in cascade is reduced by 11.07%. Among three kinds of cooling holes, the arrangement of the elliptical hole performs the best film cooling effect on the profiled endwall. Compared with the plain endwall, non-axisymmetric endwall with elliptical cooling holes improves film cooling coverage by 10.87%, reduces the Stanton number by 8.88%, and increases the net heat flux reduction performance by 4% at M = 0.7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
