Effect of non-metallic silicon content on the microstructure and corrosion behaviour of AlCoCrFeNi high-entropy alloys

Abstract

AlCoCrFeNi high-entropy alloys (HEAs) have shown excellent mechanical properties and high-temperature oxidation resistance but poor corrosion resistance owing to the high contents of the aluminium passivation film. In this study, Si was added to these alloys with the aim of improving the composition and stability of the passivation films. The microstructure and corrosion behaviour of AlCoCrFeNiSix (molar ratio x = 0, 0.1, 0.2, 0.3, and 0.4) HEAs were investigated. Dendritic and spinodal decomposition regions were observed in all five alloys. In the dendritic region, the dendritic structures transitioned from a petal shape to a dendritic shape with increasing Si content. Phase separation occurred in the spinodal decomposition region, which predominantly consisted of ordered body-centred cubic (B2) and disordered body-centred cubic (A2) phases. The size of the A2 phase decreased, and the amount of the A2 phase increased with increasing Si content. An optimised Si content could enhance the stability of Al and Cr passivation films, whereas excessive Si imposed an adverse effect by forming a Cr passivation film. The corrosion resistance of AlCoCrFeNiSi0.2 HEAs was optimum with a passive current density of 3.2 μA/cm2, which was 0.2 times that of the obtained AlCoCrFeNi HEAs without Si. The type of corrosion changed from local corrosion of AlCoCrFeNiSix (x ≤ 0.3) HEAs to general corrosion of AlCoCrFeNiSi0.4 HEAs. The corrosion mechanisms of the AlCoCrFeNi HEAs with various Si contents were elucidated.