Effect of nitrogen content on the static recrystallization and precipitation behaviors of vanadium–titanium microalloyed steels

Abstract

Abstract Double compression tests were performed on vanadium–titanium microalloyed steels with different nitrogen contents by using a Gleeble-3800 thermo-mechanical simulator to study the softening behaviors of the deformed austenite during different time intervals between the two passes. The static recrystallization fractions were calculated by the stress offset method and static recrystallization diagrams for the tested steels were obtained. The effects of deformation temperature and interval time on the softening behaviors were analyzed. Especially, the effect of nitrogen on the softening behaviors of the tested steels is discussed in detail. The results showed that the softening behaviors of the tested steels with various nitrogen contents are different. As far as the steel with low nitrogen content is concerned, the softening fraction increases monotonically with increasing time interval, and higher temperature can promote the static recrystallization. However, with more nitrogen added into vanadium–titanium microalloyed steel, precipitated particles of vanadium titanium carbonitride can be observed in the tested steel at the temperature of 850 °C or 800 °C, which leads to the formation of plateaus on the softening curves. An increase in nitrogen content in the steel is favorable for vanadium titanium carbonitride precipitation, which leads to a stronger prohibition of static recrystallization and a longer plateau on the softening curves. Moreover, the precipitated particles in the tested steel will not play an inhibition role in static recrystallization until the nitrogen content in the steel reaches a critical value.