Abstract
Abstract The main intention of this research is to investigate the Corrosion Resistance, Hardness and Wear properties of Al-6082 by varying percentage of Nickel as an alloying element. Fabrication of Al-6082-Ni alloy is done using Liquid Metallurgy Technique. Nickel in powder form (60µ) is added to molten Al-6082 in 2%,4%,6%,8% by its weight and separate specimens of different percentage of Nickel are casted by pouring a homogenous molten metal mixture into a split-die. Casted Al-6082 specimens with varying percentages of Nickel are machined according to ASTM standards, followed by a series of experiments to determine variation in Hardness, Corrosion Resistance and Wear properties. It is observed that Al-6082 with increase in percentage of Nickel showed almost 10-40% increase in its Hardness along with significant increase in both Corrosion Resistance and Wear properties compared to its purest form.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.