Abstract
The Cr–Ni and Cu–Cr–Ni alloys were prepared and their dielectric strengths were tested in a vacuum chamber. The experimental results showed that the Cr95Ni5 (at.%) alloy prepared by vacuum arc melting could strengthen the dielectric strength of Cr by 130%, and the addition of the Cr–Ni alloy powders could more obviously improve the dielectric strength of the Cu55Cr45 alloy than that of Ni. The dielectric strength of Cu (Cr95Ni5)(Cu = 55, Cr95Ni5 = 45, at.%) was higher than that of commercial Cu55Cr45 alloys and improved by 61%. The results revealed that the liquid phase separation took place in the Cu–Cr–Ni alloys during the vacuum breakdown. The Ni addition could restrain the liquid phase separation of the Cu–Cr alloys and refine the Cr particles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
