Abstract

ABSTRACTThe tradition of using lime as a binder has been in practice over the centuries and is cited in the architectural feats of all kinds of civilizations. Besides the basic ingredients of lime, sand and water, organic admixtures were also mixed into the mortars to modify fresh and hardened state properties as well as to enhance its durability. The motivation of the present study was to develop a replacement of synthetic admixtures by the bio-admixtures. The plant extract of Cissus glauca Roxb (CGR) which is being used in ancient temples and monuments in Kerala has been tested as admixture in varying concentrations and fermentation periods in lime mortar mix. The admixture is polysaccharide rich and a moisturizing agent.Tests were conducted to measure changes in microstructure of the mortar; fresh state properties such as setting time and workability, mechanical properties such as compressive strength and flexural strength. Also, physical characteristics of admixture modified mortars such as bulk density, porosity and water absorption were also determined. Morphological analysis using SEM with EDX, mineralogical analysis using XRD and organic analysis adopting FT- IR have been done to validate the results of mechanical and physical tests. Capillary water and salt absorption by suction and resistance to salt crystallization cycles were measured as an indicator of durability properties.The admixture modified mortar resulted in increased mechanical properties and reduced water absorption. It also limits the capillary rise of water and salt intrusion through the hydrophobic nature. The admixture modified mortar have also offered better resistance against the damaging action of deteriorating salts such as sodium chloride and sodium sulphate crystallization cycles. Polysaccharides and proteins in the plant extract interact with the calcium hydroxide of slaked lime and forms complexes. Hence the, natural polymer has increased the durability of hydraulic lime mortars used for repair and it could be a natural alternative to synthetic admixture.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.