Abstract
Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate solution was used as alkaline activator. In order to investigate effect of NaOH concentration on microstructure of boiler ash based geopolymer 6 different NaOH concentration (6M, 8M, 10M, 12M, 14M, 16M) were used. The boiler ash based geopolymer samples were cured in oven at temperature 80 °C for 24 hr. The compressive strength of geopolymer samples at 7 days showed that 14M obtained the maximum strength (13.9 MPa). This result was supported with SEM analysis were the 14M geopolymer sample showed more dense geopolymer matrix compared to others.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
