Effect of Nanopillars on the Wetting State and Adhesion Characteristics of Molten Aluminum Droplets.

Abstract

To solve the adhesion problem between molten aluminum and vacuum ladle liner during the electrolytic aluminum production process, the wetting state and adhesion properties of molten aluminum droplets on substrate surfaces with different nanopillars are investigated based on molecular dynamics. The results show that the adhesion strength of molten aluminum droplets in different wetting states has the pattern Young state > Wenzel state > Cassie state. Effects of increasing nanopillar height or interval are poles apart in the wetting state and adhesion characteristics of aluminum molten droplets. The critical height and critical interval of the nanopillar where the wetting state transition occurs are obtained. The increase of the nanopillar width can induce the wetting state transition from the Cassie state to the Wenzel state. In addition, the phantom wall method is applied to study the variation of the separation force. It is found that a peak in the separation force curve occurs when the molten droplet separates from the bottom of the nanopillar interval or the top of the nanopillar. The separation force curves of the droplets in the Young state and the Cassie state have single peaks, while the droplets in the Wenzel state have double peaks.