Effect of nanoparticles (Al2O3 and CeO2) blended with biodiesel on combustion, performance, and emissions of a diesel engine

Abstract

The increase in the utilization of fossil fuels in almost all the energy production sector badly impacts the environment because of incomplete combustion. The incomplete combustion of fuels releases soot, unburned hydrocarbon, and greenhouse gas emissions, contributing significantly to climate change. In the current experimental work, the evaluation of the effect of the addition of aluminium oxide (Al2O3) and cerium oxide (CeO2) nanoparticles in Jatropha biodiesel (B20) has been performed on the combustion, performance, and emission characteristics of compression ignition engine. These nanoparticles have been added because they have a large surface area-to-volume ratio. The air-fuel mixture and the evaporation rate are enhanced, leading to improved burning. The increase in brake thermal efficiency has been observed with nanoparticles blended fuel, i.e. (B20 + 30 ppm Al2O3 + 30 ppm CeO2) by 9.354%. In contrast, drop-in oxides of nitrogen, carbon monoxide, HC, and smoke opacity emissions were observed by 24.67%, 33.33%, 23.08%, and 34.01%, respectively, compared with pure biodiesel. Using nanoparticles in Jatropha methyl ester reduces ignition delay, increases combustion duration, and starts earlier combustion, reducing heat release rate, cylinder pressure, and pressure rise rate by 10.53, 1.994, and 3.687%, respectively, as compared to the B20 blend.