Effect of nanofiller aspect ratio on the stress relaxation and creep response of toughened pom composites

Abstract

Ternary composites composed of polyoxymethylene (POM), polyurethane (PU), and sodium fluorohectorite (FH) or sodium bentonite (BN) were produced by the melt compounding masterbatch (MB) technique. The related MB was produced by mixing the PU latex with water-swellable FH or BN. The dispersion of the nanofillers in the composites was studied by X-ray diffraction techniques. The crystallization of the POM-based systems was inspected by polarized optical microscopy (PLM). The stress relaxation and creep properties of the composites were determined in short-time stress relaxation and creep tests (creep at various temperatures), respectively. The POM/PU/FH composites produced by the MB technique outperformed the POM/PU blend and the POM/PU/BN system in respect to most of the stress relaxation and creep characteristics. This fact was attributed to the higher aspect ratio of FH compared with that of BN. The master curves (creep compliance vs. time) constructed by employing the time-temperature superposition principle showed that the Findley power law was fully applicable to the experimental results obtained.