Abstract

The dilution effect of N2/CO2 on the laminar burning velocity of H2–CO–O2 mixtures was investigated. The dilution fraction of N2 and CO2 in the unburned mixtures varied from 0% to 70% and 0%–50%, respectively, and H2 content in H2–CO fuels altered from 5% to 100%. All the studies were carried out at standard laboratory conditions (1 atm, 298 K) with equivalence ratio changing from 0.6 to 2.0. The Heat flux method and OH-PLIF (Planar Laser-Induced Fluorescence) based Bunsen flame method were employed to measure the laminar burning velocities. The Li mechanism was used in simulations, due to its good prediction of laminar burning velocities. Based on extensive experimental results, the correlations between dilution fraction and laminar burning velocity reduction rate were analyzed. It was found that, for a given dilution fraction, the reduction in laminar burning velocity is largely independent equivalence ratio and fuel H2–CO mole fraction. This behavior does not extend to all fuels, e.g. methane. Exploiting the lack of dependence on equivalence ratio and fuel composition, a unified correlation equation was proposed which can be used to predict the laminar burning velocities of H2–CO fuels for given fuel component, dilution rate and equivalence ratio.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.