Abstract

The explosion characteristics of premixed gases under different equivalence ratios (1.0-3.0) and inert gas addition (5-20%) are experimentally investigated, and sensitivity analysis of the radical reactions is carried out using the USC Mech II model to analyze the molar fraction of radicals. The results show that at high equivalence ratios, inert gas has little effect on flame stability. The addition of an inert gas reduces the tensile rate in the early stage of flame growth. At high equivalence ratios, CO2 inhibits explosive flame propagation twice as effectively as N2. Due to the large heat capacity and chemical kinetic effects, CO2 has a stronger inhibitory effect on the explosion pressure than N2, and the inhibition efficiency on the explosion strength is nearly twice that high. To further analyze the effect of different inert gas addition ratios on chemical kinetics, sensitivity analysis, and molar fraction simulations were performed. The thermal and chemical kinetic effects of CO2 cause later generation of H and OH radicals and the partial chain reaction involving CO2 causes a lower peak of H radicals than the peak of H radicals generated under an N2 atmosphere. However, CO2 is a direct reactant and the third body to produce a small chemical kinetic effect.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call