Abstract
Cavitation in the semicrystalline polymer polyamide 6 has been studied in terms of 3D void morphology and distribution in the notched region of axisymmetric specimens using synchrotron radiation tomography at submicrometer resolution. Ex-situ (interrupted and unloaded) tests at different stages of straining reveal damage initiation in form of penny-shaped crazes at maximum load. An in-situ (under load) test confirms the damage morphology at maximum load. When a neck appears and extends within the notch, the penny-shaped crazes extend in height, resulting in a volume change. Final failure is seen to occur from the specimen interior via coalescence of several voids resulting in large cavities. The multiaxial stress state generated by the axisymmetric notch causes crazes/cracks that are larger in diameter than those occurring during necking of an initially smooth specimen. The distribution void volume fraction as a function of the radius is measured via image analysis, showing a damage maximum at the specimen center that decreases toward the specimen border. This distribution was found to be consistent with that of the stress triaxiality ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
