Abstract
The concept of industrialization of the construction technology has emerged as well accepted and preferred option in the field of building construction now days in order to reduce in – situ construction up to maximum extent. Ferrocement is the one of the relatively new cementitious composite considered as a construction material. The main aim of this study is to investigate the behavior of Ferrocement panel under low velocity impact. Size of panel is 250 x 250 mm and thickness is varying from 20mm to 40mm. Corrugated fibers were added in panels. Volume of corrugated fibers was considered as 1.5% of total volume of panel. Weld mesh and woven mesh were used in ferrocement panels. Numbers of layers of mesh were 2 and 3. Height of drop is 1m. M30 and M40 Grade of mortar were used. Equivalent stress, Normal stress and Deformation were the main parameters for this research work. From the results it can be concluded that weld mesh with corrugated fibers is good at the impact resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.