Effect of molecular structure in branched polyethylene on adhesion properties with polypropylene

Abstract

Adhesion properties between branched polyethylene (PE) and isotactic polypropylene (PP) were studied by a peel test and scanning electron microscopy. In this study, two types of branched PEs were used; one is a linear low density polyethylene (LLDPE) and the other is a high pressure low density polyethylene (LDPE). The adhesive strength of the LLDPE/PP is much higher than that of LDPE/PP. Furthermore, the formation of PE influxes between PP spherulites has a small effect on the adhesion. The dynamic viscoelastic measurements for the binary blends composed of branched PE and PP were also carried out to estimate the interfacial tension by using a rheological emulsion model proposed by Palierne. The interfacial tension is 1.0 mN for LLDPE/PP and 2.1 mN for LDPE/PP, suggesting that the interfacial thickness of LLDPE/PP is about twice that of LDPE/PP. The adhesive strength between branched PE and PP will be determined by the interfacial thickness, which represents the entanglements between two polymers. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 457–463, 1998