Abstract
Cermet materials is a important new engineering materials with the advantages of ceramics and metal materials. The Al2O3/Al cermet materials is prepared via the powder metallurgy method, the effect of sintering technology on properties of Al2O3/Al cermet materials is researched in this paper, which lay the base for preparing the high performance cermet materials. The results are shown through the study, the denstity of cermet is increased with an increasing moliding pressure, the sample density is 2.084g/cm3 as the pressure for 40MPa and the sintering temperature at 600¡æ, the density is higher, that is to say it is highest performance, the distribution of aluminum and alumina is most uniform. When the sintering temperature is higher, howerver, the molding pressure is lower, the lower density of the sample is shown, the aluminum is easier to overflow the surface of the sample.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.