EFFECT OF MOISTURE AND WATER ACTIVITY ON TEXTURAL PROPERTIES OF RAW AND ROASTED COFFEE BEANS

Abstract

ABSTRACT The effect of moisture and water activity (Aw) on the textural properties of raw and roasted (light, medium and dark) coffee beans was investigated. Water–coffee interactions were described by the sorption isotherm and the mechanical properties of the samples equilibrated in the 0–0.95 Aw range were studied by uniaxial compression were studied. Roasted beans presented a lower strength and toughness than raw ones and, independently from roasting, resulting textural properties were highly dependent on Aw. At increasing hydration degree, an increase in strength and toughness was observed until a critical Aw value, different for raw (0.75) and roasted (ca. 0.86) beans related to a water, was reached. This was plasticization effect. Above these critical Aw values, a progressive softening of the bean matrix occurs. In roasted coffee beans, this plasticization determined the loss of the characteristic brittleness. The critical Aw value, above which plasticization occurred, was determined by modeling the compressive modulus using the Fermi's distribution function.PRACTICAL APPLICATIONSCoffee beans are a highly hygroscopic matrix and could readily take up moisture when exposed to the environment during storage. The characteristic brittleness and fragility induced by roasting is the primary attribute of roasted coffee beans. It is of great interest for process purposes to limit the textural changes of beans during their shelf‐life, mainly in relation to the grinding step carried out on roasted coffee beans before the extraction of coffee brew. The investigation of the effect of water content and state on textural properties of both raw and roasted coffee beans could have implications regarding the work to be applied during the grinding process.