Abstract
The effect of modes of heterogenizing annealing (in the temperature range of 130 – 230°C with exposure of 6 – 24 h) before cold rolling on the grain size after recrystallization annealing of alloy 1565ch is determined. The mode of heterogenizing annealing, which provides formation of recrystallized grains less than 17 μm in size in sheets after rolling reduction of at most 50% and growth in the ductility characteristics of the alloy, is determined. The conditions of formation of recrystallized grains with a size below 10 μm and the parameters of treatment for a superplastic condition are obtained. The parameters of superplasticity of large-thickness sheets produced by the developed process are assessed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.