Effect of Mn content on the structure, electromagnetic properties, and electromagnetic wave absorption characteristics in La0.7Sr0.3Mn1+xO3

Abstract

The perovskite manganese oxide, La0.7Sr0.3Mn1+xO3 (x = −0.4, −0.2, 0, 0.2, 0.4, 0.6, 0.8, 1.0), was synthesized using the solid-state reaction method. A single-phase perovskite structure was obtained at the stoichiometric composition (x = 0). However, with an increase in Mn excess (x > 0), secondary phases of Mn2O3 and Mn3O4 formed and increased, while La2O3 and Sr-rich phases emerged when Mn is deficient (x < 0). The electrical conductivity, permittivity, and permeability of the samples showed significant variations with x, as both charge transport and magnetism originate from the presence of Mn. Complex permittivity (ε', ε") and permeability (μ', μ") spectra were utilized to calculate RL maps based on a transmission line theory. For samples with x ≥ 0, which exhibited relatively high values of ε' and ε", there was no significant absorption of electromagnetic (EM) waves within the measured frequency range (0.1 ≤ f ≤ 18 GHz) due to high EM wave reflection. Conversely, the Mn-deficient samples (x = −0.2, −0.4) demonstrated excellent EM wave absorption properties in the GHz range. This can be attributed to their favorable impedance matching characteristics, resulting from significantly reduced ε' and ε" values in the Mn-deficient samples. Notably, the sample with x = −0.2 exhibited the most outstanding EM wave absorption characteristics, with an RL value of −56 dB at a frequency of 2.33 GHz and a thickness of 7.59 mm. Additionally, it achieved an RL value of −50 dB at 9.8 GHz and 2.90 mm thickness.