Abstract
To date, the most common insulating oil used in oil-immersed transformers is mineral insulating (MI) oil, which is derived from petroleum. Owing to the depletion of petroleum over the years, it can be anticipated that petroleum-derived products such as MI oils will also deplete in the future. MI oils are not only non-renewable, but they are also non-biodegradable, where these oils are harmful to the environment in cases of oil spillage. Therefore, the aim of this study is to investigate the potential of mixing MI oil with natural ester insulating (NEI) oil in order to reduce the high dependency on MI oil for transformer applications. The MI and NEI oils were mixed with different mixing ratios. AC breakdown voltage test was conducted on the MI-NEI oil blends according to the ASTM D1816 standard. From the results, it is found that the following mixing ratios (30% of MI oil + 70% of NEI oil, 20% of MI oil + 80% of NEI oil) result in significant improvement in terms of the AC breakdown voltage compared with unused MI oil. The flash point and corrosivity levels of the oil blends were also examined.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of Electrical Engineering and Informatics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
