Effect of mixing intensity on biodegradation of phenol in a moving bed biofilm reactor: Process optimization and external mass transfer study

Abstract

In this work, an effort has been made to design the process variables and to analyse the impact of mixing intensity on mass transfer diffusion in a moving bed biofilm reactor (MBBR). A lab-scale MBBR, filled with Bacillus cereus GS2 IIT (BHU) immobilized-polyethylene biocarriers, was employed to optimize the process variables, including mixing intensity (60–140 rpm), phenol concentration (50–200 mg/L), and hydraulic retention time (HRT) (4–24 h) using response surface methodology. The optimum phenol removal of 87.64 % was found at 100 rpm of mixing intensity, 200 mg/L of phenol concentration, and 24 h of HRT. The higher mixing intensity improved the substrate diffusion between the liquid phase and the surface of the biofilm. The external mass transfer coefficients were found in the range of 1.431 × 10-5-1.845 × 10-5 m/s. Moreover, the detection of catechol and 2-hydroxymuconic semialdehyde revealed that the Bacillus sp. followed the meta-cleavage pathway during the biodegradation of phenol.