Abstract
Ti-6Al-4V ELI (Extra Low Interstitial) alloy have been widely used as alternative bone due to its excellent biocompatibility, although it still has many problems such as high elastic modulus and toxic. Therefore, biomaterial with low elastic modulus and nontoxic has to be developed. In this study, the raw materials which are nontoxic elements such as Nb and Mo were mixed and milled in a mixing machine (24h) and a high energy mechanical ball milling machine (1h, 4h and 8h) respectively. Ti-Nb-Mo-CPP composites were fabricated by spark plasma sintering (SPS) at 1000°C under 70MPa using mixed and milled powders. The effects of CPP contents and milling time on biocompatibility and mechanical property have been investigated. By X-ray diffraction (XRD), chemical reaction during the sintering was occurred and revealed new phases, Ti2O, CaO, CaTiO3, and TixPy. Vickers hardness of composites increases with increase milling time and addition of CPP contents. Biocompatibility of CPP added Ti-Nb-Mo alloys were improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
