Year-end Sale % OFF 
Abstract
High carbon and low alloy chromium steels have been studied to determine the effect of the microstructure on tensile fracture of quenched and lightly tempered low alloy steel containing undissolved spheroidal carbides. The steels with a volume fraction of 8 and 13 vol % and containing particle sizes from 0.32 to 1.14μm were investigated. In the case of steel containing 8 vol % undissolved carbides, many twinned plates were observed in the matrix martensite and microtwinning was observed in the carbide/matrix interfaces. The steel failed in a macroscopically brittle manner and the true fracture stress of the steel was independent of the carbide particle size, while the data exhibited a large scatter. In the case of steel containing 13 vol % of undissolved carbides, the matrix martensite consisted predominantly of lath martensite and a well-defined forest of dislocations was observed around the carbides. Failure of the steel occurred in the relatively early stage of plastic deformation and the true fracture stress of the steel increased with decreasing carbide particle size.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
