Abstract
The microstructural evolution of Inconel 718 during aging processes has been studied through a combination of eddy current testing, X-ray diffraction analysis, and metallography and hardness measurements. Measurements were carried out in samples subjected to eight different heat treatment cycles, between 620 and 1035°C for 1–18 h. Different amounts of secondary precipitates were achieved, reaching 18% of delta phase for samples overaged at 900°C for 18 h. Results show that the different microstructures of Inconel 718 obtained have a distinguishable effect on electrical conductivity when this is measured through an appropriately sensitive technique (i.e. eddy current testing). The lowest conductivity values were observed for under aged samples (1·44% IACS). A clear increase in conductivity values was seen for all aged or overaged conditions, reaching a maximum of 1·63% IACS, when coarsening of intra granular precipitates, associated with an increase in density of globular precipitates at grain boundaries, was identified. The influence of microstructure on conductivity could be shown to be due to the competition between two effects on the scattering of electrons: matrix purification and precipitation characteristics. A combination of hardness values and electrical properties proved to be a fast and practical way of determining the stage of aging of the alloy.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
