Abstract
The effect of microstructure on the corrosion behaviors of ultralow‐carbon bainitic (ULCB) steel in 3.5 wt% NaCl solution is discussed. Four ULCB steel specimens with different microstructures are designed via controlling the cooling routes after austenization, namely, furnace cooling (FC), air cooling (AC), oil cooling (OC), and water cooling (WC). Their corrosion behaviors are investigated by alternating immersion test (including weight loss and rust layer observation) and electrochemical tests (including polarization curves and electrochemical impedance spectroscopic measurements). Results show that the corrosion resistance of ULCB steel specimens decreases with increase of cooling rate, that is, in the following sequence: FC > AC > OC > WC. Furthermore, the electron backscatter diffraction characterization and scanning Kelvin probe force microscopy are performed to build the relationship between microstructure and corrosion behaviors of ULCB steels. The reduced corrosion resistance of ULCB steels results from the increased number of microgalvanic couples because of the significantly increased density of grain boundaries with increase of cooling rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.