Effect of Microstructure Change on Mechanical Properties after High Temperature Forming of Ti-6Al-4V Alloy

Abstract

Ti-6Al-4V alloy is not easy to machine complicated shapes due to its low thermal conductivity, so high-temperature forming techniques such as ring-rolling are being applied. When this high-temperature forming technology is applied, the microstructure is greatly changed by process variables, and the mechanical properties of the forming product are also different accordingly. In particular, in the case of the Widmanst tten structure, α lamellar spacing and colony size have a great influence on mechanical properties. Therefore, in this study, the most suitable process conditions were selected by performing a high-temperature compression test to apply the ring-rolling process to the Ti-6Al-4V alloy used as an aerospace material. After that, the microstructure of the forming product was observed, the effects of α lamellar spacing and colony size on the mechanical properties were confirmed, and the correlation between mechanical properties and microstructure was evaluated based on this.