Abstract
Large-scale non-deformation inclusions in tire cord steel increase the breakage risk, and the Si-Mn deoxidization is used to control the inclusion composition in the plasticized region with a lower melting point. In order to study the influence of the composition change of refining slag due to the erosion at the slag line on the inclusions of MnO-SiO 2 system with the low melting point, the silicon-manganese oxide inclusions were synthesized, and steel samples were prepared according to the composition of 82B tire cord steel. No top slag trial and the top slag trials of low basicity refining slag with 0%, 5%, 10% and 20% MgO content were studied in the MgO crucible at 1600°C (CaO%/SiO 2 %=1, Al 2 O 3 =3%). The properties of typical inclusions in steel were observed using SEM-EDS and automatic statistical. Results showed that [Mg] dissolved by MgO crucible into molten steel in the no-slag test is insufficient to produce Mg-containing inclusions, and MgO-SiO 2 inclusions appear in the top slag trials. In general, the MgO content in the top slag has little effect on the silicon manganese oxide inclusions. Appropriate increase of MgO content in refining process is conducive to reducing the corrosion of slag line and extending the service life of MgO-C brick.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.