Abstract
This work aims to enhance the polymeric composite properties by adding Iron wire mesh (Fe) and aluminum wire mesh (Al) as reinforcement materials with various ratios. A polymer blend of the [epoxy (EP)+ polyester (UPS)] as matrix material has been utilized. The hand layup approach has been utilized for manufacturing castings. Epoxy and polyester have been mixed with different volume ratios, involving (95:5,90:10, 85:15,80:20, and 75:25 Vol.%) of (epoxy: polyester). The blend was be reinforced with metal mesh with volume fractions (5,10,15, and 20%). The results show the best ratios of ultimate tensile strength are (95% epoxy + 5% unsaturated polyester), and tensile strength and young modulus increase with increased volume fraction of metal mesh. The best compressive strength (CS) value was obtained for a sample of (95% epoxy +5% unsaturated polyester). The compressive strength increased with increased volume fraction of iron mesh but reduced with used aluminum wire mesh. Also water absorption increased with increased unsaturated polyester, iron mesh, and aluminum mesh percentage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Engineering and Sustainable Development
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
