Effect of Metakaolin and Lime on Strength Development of Blended Cement Paste

Abstract

To develop a more reactive pozzolan for supplementary cementitious materials (SCMs), the co-calcination of kaolinite and limestone was investigated for its contribution to hydration of blended cement. Kaolinite (with ~50 wt% quartz impurity) was calcined at 700 °C, and a mixture of kaolinite and limestone was calcined at 800 °C. These activated SCMs were added to ordinary Portland cement (OPC), replacing ca. 30 wt% of the OPC. The compressive strength of these blended cement paste samples was measured after 28 and 90 days, while the hydration products and microstructural development in these blended cement pastes were analyzed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The results revealed that adding free lime to OPC, together with metakaolin, led to enhanced compressive strength. The compressive strength of this new blended cement paste reached 113% and 112% of the compressed strength of pure OPC paste after 28 and 90 days of hydration, respectively. Furthermore, this study showed that the improvement was due to the increased consumption of Portlandite (CH), the formation of calcium aluminosilicate hydrate (CASH), and the reduction of porosity in the sample containing free lime and metakaolin.