Abstract
Welding of aluminum (Al) and titanium (Ti) is difficult and challenging due to their differences in chemical and physical properties, and the evolution of brittle intermetallic compounds. Formation of critical intermetallics can be minimized by using an interlayer material, which leads to ternary mechanical mixing in the weld nugget. In the present investigation, a zinc (Zn) interlayer has been used during friction stir welding (FSW) of Al–Ti. It has been found that tool offset position is one of the important parameters in controlling the amount of ternary mechanical mixing of materials. The mechanical mixing of Zn with Al and Ti alters the phase evolution and restricts the formation of the brittle Al3Ti intermetallic compound. The optimum tool offset exhibits a homogeneous mechanical mixing and inhibits the formation of brittle intermetallic compounds, which leads to a substantial increment in the mechanical properties of the weld.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.