Abstract
The treatment of beryllium wastewater has become a major problem in industry. In this paper, CaCO3 is creatively proposed to treat beryllium-containing wastewater. Calcite was modified by an omnidirectional planetary ball mill by a mechanical-chemical method. The results show that the maximum adsorption capacity of CaCO3 for beryllium is up to 45 mg/g. The optimum treatment conditions were pH = 7 and the amount of adsorbent was 1 g/L, and the best removal rate was 99%. The concentration of beryllium in the CaCO3-treated solution is less than 5 μg/L, which meets the international emission standard. The results show that the surface co-precipitation reaction between CaCO3 and Be (II) mainly occurs. Two different precipitates are generated on the used-CaCO3 surface; one is the tightly connected Be (OH)2 precipitation, and the other is the loose Be2(OH)2CO3 precipitation. When the pH of the solution exceeds 5.5, Be2+ in the solution is first precipitated by Be (OH)2. After CaCO3 is added, CO32- will further react with Be3(OH)33+ to form Be2(OH)2CO3 precipitation. CaCO3 can be considered as an adsorbent with great potential to remove beryllium from industrial wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.