Effect of magnesium on calcium silicate hydrate (C-S-H)

Abstract

The addition of MgCl2 to synthetic calcium silicate hydrate (C-S-H) with Ca/Si=0.8 lowers the pH values below 10. Experimental observations and thermodynamic calculations show the destabilization of C-S-H and the precipitation of magnesium silicate hydrate (M-S-H). In contrast, the addition of MgO to C-S-H increases the pH values up to 11.5 and the Ca/Si in C-S-H from 0.8 to ~1.0. At high pH, the formation of M-S-H and brucite is observed experimentally. Less brucite is present at 50 than at 20°C indicating a slow dissolution kinetic of brucite at 20°C. Thermodynamic modelling is in good agreement with the changes in C-S-H and M-S-H formation in the presence of MgO although no brucite is predicted.M-S-H is observed in the presence of both MgCl2 and MgO, is stable from pH7.5 to 11.5 and has a structure comparable to the structure of M-S-H prepared from MgO and SiO2 only.