Abstract
The ZnO thin films with preferential C-orientation and smooth surface have been prepared using an RF magnetron sputtering method by the insertion of low-power (LP) sputtered ZnO buffer. The XRD results show that the C-orientation of the ZnO buffer layer deposited under the RF power of 30 W is much better than that deposited under higher RF power. With the increase of the LP-buffer thickness, the C-orientation as well as the crystal quality of ZnO films improves, the surface becomes smooth and the RMS roughness decreases from 88.4 A to 38.5 A. The ZnO lattice is independent of the insertion of LP buffer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.