Effect of long‐term natural aging on the thermal, mechanical, and viscoelastic behavior of biomedical grade of ultra high molecular weight polyethylene

Abstract

AbstractIn the total joint prostheses, Ultra High Molecular Weight Polyethylene (UHMWPE) may undergo an oxidative degradation in the long term. The overall properties of UHMWPE are expected to be altered due to the oxidative degradation. The goal of this study is to investigate the effects of natural aging up to 6 years in air on the thermal, mechanical, and viscoelastic properties of UHMWPE that was used in total joint replacement. The changes in UHMWPE properties due to aging are determined using Differential Scanning Calorimetry (DSC), uniaxial tensile tests, and Dynamic Mechanical Analysis (DMA). The DSC results show that the lamellar thickness and degree of crystallinity of UHMWPE specimens increase by 38% and 12% due to aging. A small shoulder region in the DSC thermograms is remarked for aged specimens, which is an indication of formation of new crystalline forms within their amorphous region. The tensile properties of aged and nonaged UHMWPE specimens show a significant decrease in the elastic modulus, yield, fracture stresses, and strain at break due to aging. The DM testing results indicate that the storage modulus and creep resistance of UHMWPE specimens decrease significantly due to aging. Also, it is remarked that the α relaxation peak for aged UHMWPE specimens occurs at lower temperature compared to nonaged ones. The significant reduction in the strength and creep resistance of UHMWPE specimens due to aging would affect the long‐term clinical performance of the total joint replacement and should be taken into consideration during artificial joint design. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010