Abstract
Due to the superior mechanical and thermal properties of nanomaterials like multi-walled carbon nanotubes, aluminum alloys containing them play a significant role in the aerospace and automotive industries. By incorporating multi-walled carbon nanotubes by weight percentage of (0, 0.25, 0.50, and 0.75) in Aluminum silicon alloy. proper dispersion is done using ball milling equipment to get the proper bonding between Aluminium silicon alloy with MWCNT then subsequently powder metallurgy followed by extrusion technique. Wear study is carried out by varying load by 20N to 40N by maintaining sliding distance constant at 1000m and speed at 3.14m/sec. Wear test indicates for 20N load that wear rate is reduced by 46% for 2-layer FGM compared to AlSi-0.5WT% MWCNT, AlSi-0.25WT% MWCNT and 10% reduction in wear rate compared to AlSi-0.75WT% MWCNT. In case of 40N, wear rate is decreased by 162% for 2-layer when compared with AlSi-0.25WT% MWCNT and by 91% when compared to AlSi-0.5WT% MWCNT. As the percentage of MWCNT increases leads to decrease in wear rate in case of 20N & 40N load for 2-layer FGM compared to nanocomposites. Optical microscopy is done to reveal the proper bonding of AlSi with MWCNT. SEM analysis is carried out to determine wear mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.